How to Reboot, Reformat, and Restore your Zune device (Now Includes Zune HD)

software: sync

re: Device Commands - How to Reboot, Reformat, and Restore your Zune device

hoahmaruwind 5/24/2008 17:01:30

 skipdeez wrote:

I find that many sync problems can be fixed by simply rebooting the device, reformatting it, or reinitializing it. Here is a list of the device commands for both V1 and V2 devices. Try these actions first if you are having a problem with syncing to your Zune device.

Reboot: Press and hold the Back button (<-) + Up on the directional pad


Sleep Mode: Back + Down


To perform the following, reboot your device, and then when the screen goes black, hold the corresponding buttons until the process begins.  (“OK” refers to pressing the center of the D-Pad/Z-Pad.)


Clear Content (Format) – Clears all media content from the device, but leaves the firmware intact.
                V1 Devices (Zune 30): Press and hold Back + Right + OK
                V2 Devices (Zune 4/8 and 80): Press and hold Back + Play/Pause


Initialize Disk – Removes the content and the firmware.  Device will be inoperable until connected to a PC so new firmware can be installed.
                V1 Devices (Zune 30): Press and hold Back + Left + OK
                V2 Devices (Zune 4/8 and 80): Press and hold Back + OK + Play/Pause

Hello,

I tried doing everything suggested by you but nothing works,

 

I am still getting cant sync, C00D11CD (C00D2772)

Error

 

re: Device Commands - How to Reboot, Reformat, and Restore your Zune device

hoahmaruwind 5/24/2008 17:49:47

ok now it is working I didnt give it enough time for a message to appear.

ahah

 

thank you very much.

re: Device Commands - How to Reboot, Reformat, and Restore your Zune device

NSILMike 5/24/2008 18:14:01
 skipdeez wrote:

I find that many sync problems can be fixed by simply rebooting the device, reformatting it, or reinitializing it. Here is a list of the device commands for both V1 and V2 devices. Try these actions first if you are having a problem with syncing to your Zune device.

Reboot: Press and hold the Back button (<-) + Up on the directional pad

Sleep Mode: Back + Down


I've read in the forums that holding play/pause is sleep mode, and holding back and down is really 'off'- thus accomplishes a reboot when you restart.
Can you clarify?

re: Device Commands - How to Reboot, Reformat, and Restore your Zune device

Wagster21 6/30/2008 06:41:35
My software or cpu doesn't even recognize my 80 any more. It worked fine and now it don't.

M. T. Wagar

re: Device Commands - How to Reboot, Reformat, and Restore your Zune device

NSILMike 7/6/2008 00:27:49
 Wagster21 wrote:
My software or cpu doesn't even recognize my 80 any more. It worked fine and now it don't.

http://support.microsoft.com/kb/944909?sd=zune

re: *Try This First* - Device Commands - How to Reboot, Reformat, and Restore your Zune device

dcyphert 7/6/2008 16:16:14
My Zune 30 has been in the dock for a few months without using it at all and haven't had my laptop connected to it either in that time. I noticed the Zune logo was appearing on the screen though and thought I'd try to use it, so I updated the software on my laptop and still can't use it, the logo still appears and resetting does nothing. Can anyone help!!! Thank you. 

~dcypher

re: *Try This First* - Device Commands - How to Reboot, Reformat, and Restore your Zune device

tallguy1530 7/17/2008 03:26:53
ok i haveva question, what is the difference between sleep & turning the Zune off? They seem the same EXCEPT after putting my Zune to sleep, you can't resume whatever you were playing. So whats the point in that? Can some1 clarify? Thank you!

I'm just being social. =]

re: *Try This First* - Device Commands - How to Reboot, Reformat, and Restore your Zune device

NSILMike 7/17/2008 11:57:23
You've basically got it.  Sleep mode keeps some low level settings and processes alive, so that the device can resume quickly.  Off is off, and at a restart the device starts everything back up like a reboot.  In sleep mode, you are using a trickle of battery, too.

re: *Try This First* - Device Commands - How to Reboot, Reformat, and Restore your Zune device

Monkee11 8/4/2008 20:32:58

Should clearing content take a really long time if I have quite a bit of music on my zune? It's been quite a while and I'm doubting that it's doing anything and might be frozen, but I don't want to reset it in case it actually does take a long time...

re: Device Commands - How to Reboot, Reformat, and Restore your Zune device

nwbeardpride 8/11/2008 17:50:19
I recently go the error C00D11CD when trying to sync music i downloaded with my zune pass. so following directions i did a reformat to correct this issue. However i encountered the same thing after. So next i tried a reformat, it failed to reinstall the firmware with this error now C00D11CD 8007000D. I am basicly stuck with a bricked zune at this point and none of my music. somone help please.

re: *Try This First* - Device Commands - How to Reboot, Reformat, and Restore your Zune device

Raunchy Hoar 8/14/2008 16:29:59
Well I understand all that, but here is my problem.

I recently had a virus on my computer which caused me to do backup and just start over.
I reinstalled the zune software, but my device wont connect. It will start charging but it will not connect.
I've tried rebooting and sleep mode already and I don't want to erase whats on my zune because it has files that i didn't back up.
I've already tried connecting to a different USB port as well. Nothing seems to be working.

Any ideas?

~Adam

re: *Try This First* - Device Commands - How to Reboot, Reformat, and Restore your Zune device

Smashing Lurve 8/21/2008 18:27:47
I tried the first two commands and nothing changed.

My problem:
-My Zune doesn't respond during sync.
-Songs only play for about 30 seconds before there is silence.
-After trying to fast forward the song and such, an error message comes up saying the song is missing or cannot be played.
-The zune sometimes freezes when selecting a song or option.
-This started when suddenly the Zune had to erase all content.

I am afraid that if do the initialize disk step, it won't respond when I connect it to a PC so the new firmware can be installed.

PLEASE HELP!!!
Its been like this for about 3 months.
 Page 2 of 49 (585 items) < 1 2 3 4 5 > ... Last »